You have the D-Rings and the picture wire on the frame. Now you have to catch the D-Rings on those little nails or hooks hanging on the wall. Isn't that a lot of fun? Even less fun when the nail or hook falls out of the wall and you have to explain why the picture fell. Should hanging a picture frame be this hard?


With the Hangman Products Bear Claw Hanger those bad, old days are over. This unique, double-headed screw is designed specifically to work with keyholes, D-rings, sawtooth hangers or wire for simple mirror and picture hanging solutions. It features a self drilling tip for studs and works beautifully in drywall. The Bear Claw Hanger is strong enough to hold 30lbs. in drywall and up to 100lbs when installed into a wood stud. When D-Rings, Wire or Sawtooths are used the Bear Claw Hanger is always hidden from view.

The Hangman Bear-Claw Hanger comes in two models, the one inch BCK and the 1¼” BCD. Both models are sold in quantities of 6, 12 and 50. The BCK has a larger inside head and a smaller outside head and is yellow zinc in color. The shaft connecting the two heads is ¼ “. Both heads on the BCD are the same size and the color is black oxide. The shaft connecting the two heads is 3/8”.

Here are the results from a field test regarding our Bear-Claw Hangers and how they work with metal studs.

All of the Bear-Claw Hangers will pierce both 20ga and 25ga steel studs when driven by a hand-held Philips screwdriver. The Bear-Claw Hanger also have a strong grip on the stud. 20 ga is the most common stud used in commercial buildings.

The only tool required for installation is a Phillips screwdriver. No more long, aggravating ordeals of trying to catch the D-Ring on that little nail or hook. Only Hangman picture hangers make life this easy.