Hanging objects flush against a wall is not as easy as we’d like it. You can do it the old fashioned way with the keyholes and screws. You need to turn on your X-Ray vision to maneuver those little keyholes onto the screws without destroying the wall, and your relationship. Then you hope for an act of God so the object will automatically be level.

The Hangman Products Flush Mount System is used for hanging mantles, cubes and mirrors flush to a wall. Like all other Hangman hanging products there are two brackets; one goes on the wall and the other goes on the inside of the top frame of the object. Depending on the size of the offset (the cavity between the wall and the front of the object) it can be relatively easy or very difficult. If you have room to maneuver in that cavity ( 2 to 3 inches) screwing the bracket to the inside of the object will not be that difficult. If the cavity is very tight I strongly suggest you hire someone very handy and make sure they have very good tools.

Once the inner bracket has been properly secured, hanging the object is just as easy as any other Hangman product. The wall bracket has a groove for the patented, Hangman bubble level so you will get it right the first time. No need to knock a dozen holes in your wall, or relationship trying to hang your mantle, cube, or mirror.

The Hangman Flush Mount System comes in four sizes. Flush Mount holding power cannot be rated because of the distance of the hanger from the wall.